PRODUCTS
PRODUCT CATEGORY
TY302 single column hydraulic press
Feature
1. The speed-increasing hydraulic cylinder is adopted, which is fast and then slow when working, with low noise, high efficiency and low energy consumption;
2. The slider adopts upper and lower electronic sensors to limit the position, which has a long life and simple operation;
3. With pressure protection, limit, semi-automatic and manual control functions;
4. Infrared hand guards can also be installed according to customer needs;
use
It is widely used in the calibration process of shaft parts and profiles in auto parts, home appliances, hardware, rubber, powder metallurgy and other industries, the pressing of shaft and sleeve parts, and the stretching, bending, embossing, and forming of simple sheet parts. Processes such as, blanking, etc., can also carry out general powder and plastic products press assembly-bending-riveting-hot pressing-embossing processing and so on.
product description
1. This series of hydraulic press uses 2-20MPA liquid pressure as the power source, and is connected to an external three-phase AC380V 50HZ or three-phase AC22060HZ AC power supply;
2. This series of equipment adopts advanced hydraulic circuit of sub-cylinder, the oil temperature is low, the idle stroke speed is above 150MM/sec, and the working speed is below 30 MM/sec;
3. Adopting a solid open structure with integral welding, which can keep the machine body sufficiently rigid, and at the same time have the most convenient operating space;
4. There are two control modes: manual and semi-automatic. Manually, the press-fitting upper die can be stopped within any range of stroke. It is equipped with an emergency pick-up button, and can also be equipped with an infrared hand guard;
5. The pressing stroke of this series of presses is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold;
6. The lifting height of the press-fitting spindle can be adjusted within any stroke range of the timer or position sensor;
7. Customers can adjust the pressure, stroke, holding time, and closing height by themselves, which is convenient for operation;
8. When the equipment is in standby mode, the noise does not exceed 75 decibels when sliding fast and moving up and down;
9. The hydraulic system meter is built in the frame, and the appearance is neat, light and stable;
10. It has an automatic counting function, and can also be equipped with a force measurement display and an intelligent temperature controller, which can be customized according to customer requirements;
HOT PRODUCTS
Messages
Service Hotline
Ningbo Factory:
Address: No. 1, Wenxia Road, Langxia Street, Yuyao City, Ningbo
About Tianyu
Case
Production
© 2021 Ningbo Tianyu Machinery Equipment Co., Ltd All rights reserved. 浙ICP备17050613号-1 Powered by www.300.cn
© 2021 Ningbo Tianyu Machinery Equipment Co., Ltd
浙ICP备17050613号-1 Powered by www.300.cn