Products

Ningbo Tianyu Machinery Equipment Co., Ltd.

undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined

TY302 single column hydraulic press


TY701 series integrated head quantitative vacuum filling machine is a new type of integrated head quantitative vacuum filling machine independently developed by our company in combination with the technological characteristics and pain points of product filling in the industry. It has the characteristics of high efficiency, fast pumping speed and no residual liquid. It is mainly used for liquid perfusion of automobile rubber bushing and rubber suspension.

Keywords: Filling equipment series

  • Product Description
  • Technical Parameter
    • Commodity name: TY302 single column hydraulic press
    • Commodity ID: F002

    It is widely used in the calibration process of shaft parts and profiles in auto parts, home appliances, hardware, rubber, powder metallurgy and other industries, the pressing of shaft and sleeve parts, and the stretching, bending, embossing, and forming of simple sheet parts. Processes such as, blanking, etc., can also carry out general powder and plastic products press assembly-bending-riveting-hot pressing-embossing processing and so on.

    Feature

    1. The speed-increasing hydraulic cylinder is adopted, which is fast and then slow when working, with low noise, high efficiency and low energy consumption;

    2. The slider adopts upper and lower electronic sensors to limit the position, which has a long life and simple operation;

    3. With pressure protection, limit, semi-automatic and manual control functions;

    4. Infrared hand guards can also be installed according to customer needs;

     

    use

    It is widely used in the calibration process of shaft parts and profiles in auto parts, home appliances, hardware, rubber, powder metallurgy and other industries, the pressing of shaft and sleeve parts, and the stretching, bending, embossing, and forming of simple sheet parts. Processes such as, blanking, etc., can also carry out general powder and plastic products press assembly-bending-riveting-hot pressing-embossing processing and so on.

     

    product description

    1. This series of hydraulic press uses 2-20MPA liquid pressure as the power source, and is connected to an external three-phase AC380V 50HZ or three-phase AC22060HZ AC power supply;

    2. This series of equipment adopts advanced hydraulic circuit of sub-cylinder, the oil temperature is low, the idle stroke speed is above 150MM/sec, and the working speed is below 30 MM/sec;

    3. Adopting a solid open structure with integral welding, which can keep the machine body sufficiently rigid, and at the same time have the most convenient operating space;

    4. There are two control modes: manual and semi-automatic. Manually, the press-fitting upper die can be stopped within any range of stroke. It is equipped with an emergency pick-up button, and can also be equipped with an infrared hand guard;

    5. The pressing stroke of this series of presses is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold;

    6. The lifting height of the press-fitting spindle can be adjusted within any stroke range of the timer or position sensor;

    7. Customers can adjust the pressure, stroke, holding time, and closing height by themselves, which is convenient for operation;

    8. When the equipment is in standby mode, the noise does not exceed 75 decibels when sliding fast and moving up and down;

    9. The hydraulic system meter is built in the frame, and the appearance is neat, light and stable;

    10. It has an automatic counting function, and can also be equipped with a force measurement display and an intelligent temperature controller, which can be customized according to customer requirements;

     

  •  

     

    Machine size table

    Mode

    A1

    A2

    A3

    A4

    A5

    W1

    W2

    W3

    W4

    Hl

    H2

    H3

    N1-N2-N3-N4

    TY302-100

    300

    160

    155

    150

    765

    450

    340

    420

    590

    810

    400

    1880

    14-25-21-11

    TY302-200

    350

    160

    180

    150

    765

    500

    370

    470

    640

    810

    400

    1950

    14-25-21-11

    TY302-300

    350

    160

    180

    200

    800

    550

    410

    520

    690

    810

    400

    1950

    14-25-21-11

    TY302-400

    400

    200

    205

    200

    850

    620

    470

    590

    760

    810

    400

    1950

    14-25-21-11

    TY302-500

    450

    200

    205

    200

    1000

    700

    500

    570

    840

    810

    400

    2200

    18-32-28-14

     

    Technical parameters

    Mode

    TY302-100

    TY302-200

    TY302-300

    TY302-400

    TY302-500

    Cylinder pressure

    3Q-100KN

    4Q-200KN

    50-300 KN

    50-400KN

    70-50 0 KN

    Liquid pressure

    13Mpa

    16. 5Mpa

    19. 5Mpa

    20Mpa

    19. 5Mpa

    Cylinder stroke

    250MM

    250MM

    250MM

    250MM

    250MM

    Descent speed

    68MM/S

    150MM/S

    180MM/S

    180MM/S

    170MM/S

    Rise speed

    90MM/S

    100MM/S

    130MM/S

    120MM/S

    125MM/S

    Pressing speed

    无NO

    16MM/S

    16MM/S

    15MM/S

    13MM/S

    Motor power

    3.7KW

    2.2KW

    3. 7KW

    5. 5KW

    5. 5KW

    Machine weight

    800kg

    1000kg

    1200kg

    1600kg

    2000kg

    Power supply

    AC380V   50HZ

Recommended Products

Online message

If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!

Submit Message